2x4 (1.5x3.5 inch) Door Barricade Brackets (2 pcs) | Drop Open Bar Holder Steel U Bracket for 2 by 4 Lumber as Security Door Reinforcement, Door Jammer, Tool Hanger for Home, Barn, Shed, Garage, Gate

Product Information

Obviously, don’t place it on a rug which can slip. But you can use it on other types of floors including tile, wood or a large carpet. If you find the installation process too complicated, seeking the services of a professional is always an option. Before you start drilling, make sure to clean the area, so there’s no dust or debris that could interfere with the installation process. Once that’s done, measure the height and width of the door frame to determine where to drill the holes. Use a pencil to mark the spots where the screws will go, making sure that they’re evenly spaced and level. There are actually two bars: a smaller inner one and a larger outer one. You can slide the smaller bar inwards or outwards to adjust the length of the bar. Door jammers—These are simple door reinforcers that use resistance to keep a door tightly shut. They have extendable bars that can be pressure-mounted between the floor and the door knob to prevent forced entry.

Just make sure you’ve followed installation instructions. How can I make my front door more secure?These bars provide an added layer of protection, making it harder for potential intruders to break in. The height of the bar can be adjusted to fit the height of your door handle (27.5”-41”). When you are not using it just push it down to its lowest height for easy storage or portability. Our drop bar kits for doors are professionally folded and welded to high precision to suit your door. Our drop bar kits do not required covers or accessories to make them fit, unlike other generic fittingdrop barsby others.

Information shown above has been supplied by the manufacturer, and is as accurate as possible (errors and omissions excepted), however they are intended only as a guide and sizes may vary slightly. We will guide you through the process, providing step-by-step instructions and helpful tips to ensure accurate measurements. Remember, if you’re not confident in your abilities to install the bars yourself, seeking the services of a professional is always an option. The bar is really easy to install. You don’t need any tools or skills. Just slip the metal loops into the handles and you are good to go.Whatever type of bar you buy, make sure it’s size can be adjusted. This will ensure it will fit regardless of your door size. b. How secure it is For hinged doors, the Y-shaped handle rests against the door handle while the padded foot presses against the floor. Note that you can also use this brace to secure a sliding door. Just remove the Y-shaped handle and then place one end against the door frame and the other against the sliding door. Adjust the bar length as necessary. What we like about it: We can’t stress enough how important it is to secure your home and protect yourself and your family. Next, it’s time to drill the holes. Ensure that you’re using the appropriate drill bit size to fit the screws you’ve chosen. Drill the holes into the door frame where you’ve made the markings, ensuring that you don’t drill too deep or too wide.

Images shown are supplied by the manufacturers. Unless stated otherwise, any tools, accessories, toys, garden equipment etc. are only shown for photographic purposes. The other end rests against the floor. It is hinged to ensure it sits flat and tight against the floor even with the bar inclined. It’s also padded to prevent marks or scratches on the floor. The legal compliance bit : You must display a sign on the inside of the door stating that the device is to be removed whilst the premises is occupied,for fire escape purposes. The bar itself is made from 20-gauge steel. It would require a huge amount of force to bend or break. Its length is adjustable (78cm to 115cm) to ensure it fits different door handle heights.

Throughout the post, we have emphasized the importance of gathering the necessary tools and supplies, measuring and marking accurately, and following the installation process meticulously. The bar should be made from strong metal that cannot be bent or broken easily. When you buy it, test it yourself and see whether you can defeat it. However, if you don’t feel confident in your abilities to install the bars yourself, don’t hesitate to seek the services of a professional.