Aux IN Music CD Interface Adapter Audio Jack Cable Lead Compatible with Samsung Galaxy, HTC ONE, Huawei, Sony Xperia Lumia, LG Phone, MP3 Player to Mazda 6, 3, 5, 2, MX5, RX8, M6, M3, Besturn B70

Product Information

Thus, by controlling the mux, you can control the audio that gets to the amplifier and thus the speakers.

BMWP 269 Alloys, BMWP pedals, Darkline rear lights, Aero spoiler, Beesting aerial, Tinted rear windows. The Bluetooth functions required either the module to be present on the board or alternate firmware or some engineering input in the panel/canbus (I cant remember quite which was required) but in most cases, switching to bluetooth mode switched the output the aux L/R input anyway.AUX is probably 80% of CD volume, annoying when driving with the top down, as you really do need it up loud, and I've got DSP (10 speakers). This cable adapter for map navigation system, which has a higher working frequency range and better sound quality than the fm transmitters.

The final result is a lot more elegant, however, with the unit able to switch over to auxiliary input at the touch of a button.Sold a number of them online, but the cars are now too old and not many requests come in, so I stopped making them. I watched the video by the Indian guy (can't remember the handle he goes by ATM *) that does repair/upgrade videos doing this job.

It's annoying when it works fine, for you to put the car back together and you've knocked it so it's crap! Guide 1: Old School Radio/Cassette Decks An old two-knob AM radio from a 1970s Ford Bronco, modified with an auxiliary input. This is quite possible, as the chip receives signals from the main microcontroller over I2C, and these are all listed in the chip’s datasheet. Generally this should work, assuming the voltage range of your input is the same as the cd player or that the amp ic expect.

This is on top of the job of wiring in the auxiliary input into the tape, CD, or other audio input subsystem.